Filter
Top Products
11
• AM/FM: it permits to commute from AM and FM.
• MEMORY+: MEMORY+ function, for the description of the function refer to the front panel description.
• MEMORY-: MEMORY- function, for the description of this function refer to the front panel description.
• STORE: for the description of the function refer to the front panel description.
Note: the above mentioned keys are active only when the device is in “Tuner” modality.
Memorizing radio stations
It is possible to memorize up to 18 FM radio stations and 18 AM ones. For the operation select the radio source and follow the
procedure:
1. Tune the radio station you’re interested in.
2. Enter in “memorizing” mode pressing and leaving the key STORE on the remote controller. On the display you can visualize the
content of the first location and two dots “:” before the location number start to flash. If no radio station has been memorized in
this location, you can see the notice “EMPTY” on the display, otherwise you can visualize the frequency of the radio station
memorized, and if possible the relative RDS message which indicates the Station Name.
3. Pressing and leaving the keys MEM+ and MEM- on the remote controller, run over the various locations and stop on the
position you want to memorize the radio station; it is possible to select the position directly using the numeric keys. For each
location the display will indicate, both the location number and the indication EMPTY if the location doesn’t contain any
memorized station or the frequency and eventual RDS message (if available) of the memorized station.
4. Press and Leave the key STORE on the remote controller to memorize the station in the selected location and exit from the
modality “memorizing”; at this point the number of the memorized location will flash for a few seconds on the display and after
the message “Stored” will appear, to indicate that the memorizing procedure has been completed and the normal functioning
has been restored.
AMPLIFIER functions
• IN+: it changes the selected source.
• VOLUME+: it increases the volume of unit.
• IN-: it changes the selected source.
• VOLUME-: it decreases the volume of the unit.
• MUTE: it activates/de-activates the mute function.
CD PLAYER functions
• PLAY/PAUSE: By pressing this button, you start CD playback or pause/resume CD playback.
• STOP/OPEN. Multifunctional button. When in play mode, by pressing this button disc playback is stopped; when in stop mode,
by pressing this button disc tray is opened/closed..
• PREV/REW: By pressing this button during playback, you move to the previous CD track or, holding it down for a few seconds,
activate fast rewind search. When playback is stopped, you may choose the CD track from which resuming playback or search
CD tracks backward.
• NEXT/FFW: By pressing this button during playback, you move to the next CD track or, holding it down for a few seconds,
activate fast forward search. When playback is stopped, you may choose the CD track from which resuming playback or
search CD tracks forward.
• 0123456789 (NUMERIC KEYS): According to the functioning state of the CD player you have two different actions:
• when the CD player is in stop it is possible to select a track pressing the number of the correspondent song(the apparatus
waits for PLAY to be pressed).
• When the CD player is playing, pressing the number of the desired song it immediately skips to the indicated track.
• TIME: pressing this key it is possible to visualize different information on the reproducing time. The alternative modalities are:
• the time that is left until the end of the song, modality “end of track” ( on the display it appears in “_” between the indication of
the minutes and the seconds).
• The time that is left until the end of the CD, modality “end of disc” (on the display it appears in “-“ between he indication of the
minutes and the seconds).
• The time that has gone by since the beginning of the CD, modality “total time” (on the display it appears in “.“ between the
indication of the minutes and the seconds).
• STANDBY CD: it switches-on and switches-off the unit.
• RPT (REPEAT): This key has two different functions according to the functioning state of the CD player.
• When the CD player is in stop it is possible to choose to repeat a track or the entire disc by pressing the key once or twice. To
choose to repeat a track you press the keys PREV and NEXT or pressing directly the number of the track using the numeric
keys.
• When the CD player is reproducing, pressing this key in two different moments determines the initial instant (A) and final (B) of
a random section to repeat. When this option is active, you can de-activate it by pressing the key again, and the normal
reproduction of the CD is re-established.