Filter
Top Products
37
GB
Setting the clock manually
The DDR-43 Plus will automatically set its clock when tuned to a
DAB+ radio station or to an FM station which is broadcasting the time
via RDS.
If the clock cannot be set using DAB+ or FM radio then you will need to
set the clock manually before the alarm function can be used. The clock
may be set while the unit is in standby mode or while playing. The clock
display is always in 24 hour format.
If it becomes necessary to set the clock manually, please follow
these steps:
1. Press and hold the Clock Set button. The hour digits on the display
will flash.
2. Press the Tuning Up or Down buttons to change the hour digits
as needed. Keep the button pressed to cause the digits to change
more quickly.
3. Press and release the Select button to confirm the hour setting.
The minute digits on the display will flash.
4. Press the Tuning Up or Down buttons to change the minute digits
as needed. Keep the button pressed to cause the digits to chang
more quickly.
5. Press and release the Select button to confirm the minutes setting.
The year digits on the display will flash.