Filter
Top Products
18
Dynamic Range Control (DRC) settings - DAB+ only
DRC can make quieter sounds easier to hear when your radio is used in
a noisy environment. This function is only for the DAB+ waveband.
1. Press the On / Standby button to switch on your sound system.
2. Press and release the Menu button so that “Station list” appears on
the display.
3. Press and release the Tuning Up or Down buttons until the display
shows “DRC”.
4. Press and release the Select button to enter the DRC
adjustment mode.
5. Press and release the Tuning Up or Down buttons to select the
required DRC setting (the default is off).
DRC off - DRC is switched off, Broadcast DRC will be ignored.
DRC low - DRC level is set to 1/2 that sent by broadcaster.
DRC high -DRC is set as sent by broadcaster.
6. Press and release the Select button to confirm the setting.
The display will then return to the previous radio display mode.
Note:
Not all DAB+ broadcasts are able to use the DRC function.
If the broadcast does not support DRC, then the DRC setting
in the radio will have no effect.