Apple DDR-43+ MP3 Docking Station User Manual


 
31
GB
iPod docking
Your DDR-43 Plus sound system has an iPod dock facility which
allows you to play digital audio files and video soundtracks held on your
iPod directly.
The DDR-43 Plus uses the Universal Dock Connector developed
for use with iPods. Recent models of iPod are supplied with
adaptor inserts which ensure correct alignment of the iPod with the
electrical connector. Earlier models of iPod were not supplied with the
necessary inserts, and so your DDR-43 Plus is supplied with insert
types 1 - 7. Should you require a later insert to use your iPod with the
DDR-43 Plus, then please contact an iPod accessories supplier.
1. Ensure that the sound system is in standby. Carefully remove the
iPod dock connector cover from the top of your sound system.
2. Place the iPod docking adaptor (types 1 - 7 supplied with the
DDR-43 Plus) into the iPod docking recess so that it is
securely seated.
3. Carefully place your iPod on the universal iPod dock connector then
press the On / Standby button to switch on the sound system.
To avoid possible damage to either device, not use your iPod
without the correct adaptor fitted in the dock connector.
4. To select the iPod mode press the Media button until “iPod” shows
on the display. If it was previously playing, your iPod will switch on
and continue playing from where it was previously stopped.
Note:
The DDR-43 Plus sound system is able to recharge your iPod’s
internal battery. Recharging does not take place while your DDR-43 Plus
is using DAB+ or FM radio.
Your iPod will use its backlight settings as configured. If these
need changing, use the iPod’s Settings menu.