Filter
Top Products
44
with this. You can buy a 3.5 stereo audio cable anywhere
where electronics are sold.
On your PC use a program for sound editing that edits
sounds as well as removes channels. One such program is
SoundForge:
http://www.sonymediasoftware.com/products/soundforgefa
mily.asp.
No matter what recording application you use, make sure
that you set the recording format to: 44Hz, 16 bit Stereo.
PCM. You are going to be saving the sound signal as a
.wav file. Choose the
record option in the sound recording
application. On the pocket PC press the button which you
have designated as the
power signal. Use the line out from
the headphone jack).
Next, stop the recording and press the
play button. If you
have recorded the signal accurately you should be able to
hear pulsing and beeping sounds which is exactly what the
IR signal sounds like. If you are using the SoundForge
application you will be able to see these sounds as a .wav
graphic. Now you are ready to highlight the correct
channel and put it on mute. Make sure that you don’t miss
this step otherwise the sound won’t be properly through the
IR device. Save the sound recording this way: 44 Hx, 16