Filter
Top Products
Battery Installation & Charging Info
10
Installing your battery
Overview of E2GO MP-2000 Unit (cont.)
9
Plug the supplied A/V cable here to allow audio & video
to be recorded directly into the unit. (p. 28)
Plug the supplied headphones into this input for private
listening.
Plug the supplied A/V cable here, to output the signal
to another display device, such as a TV (p. 29)
Connect the USB cable from your computer to this port
for file transfers and other related tasks. (p. 13)
Plug the supplied AC adapter into this input to recharge
the battery. (p. 11)
15: A/V Input
16: Headphone Input
17: AV Output
18: USB 2.0 mini input
19: AC Power input
Allows you to securely mount the unit on a tripod or similar device.
The supplied removable lithium-Ion rechargeable battery is located
here. Please see p. 11 on how to charge the battery.
20: Tripod Socket
21: Battery Compartment
14: Speaker
External speaker for listening
without Headphones.
(When headphones are plugged
in, the speaker is disabled).
Back View
Side View
Bottom View
2. Insert Supplied
Rechargable Lithium-Ion
battery into battery com-
partment. (see figure 2.)
Close compartment and
then follow the charging
procedures on the next
page.
1. Open Battery compart-
ment by applying slight
downward pressure and
sliding the compartment
open. (see figure 1.)
1.
2.
20
21