Filter
Top Products
PITCH ADJUSTMENTS (CONT.)
2. PITCH BENDING:
Unlike the PITCH KNOB (11) adjustment this function will momentarily increase or decrease a tracks
speed during playback. To operate the PITCH BEND use the (-) & (+) PITCH BEND BUTTONS (12).
The maximum pitch bend percentage allowed by PITCH BUTTONS (12) is +/-16%. The pitch bend
function will work in conjunction with the PITCH KNOB (11) pitch setting. For example, if the PITCH
KNOB (11) is set to a 4% pitch gain the pitch bending process will begin at 4% and will continue to
the maximum of +/-16%.
Holding down on the (-) PITCH BEND BUT-
TON (12) will provide a slow down in the play-
back pitch.
Figure 33
Using the PITCH PERCENTAGE
SELECTOR (13): You may choose a pitch
operating range at any time. To change the
operating range be sure the pitch function
is turned on, see figure 31. The pitch per-
centage can be changed between +/-4%,
+/-8%, and +/-16%. 4% will allow the least
amount of pitch manipulation and 16% will
allow the most amount of pitch manipula-
tion. To adjust the different values, press
the PITCH PERCENTAGE BUTTON (13) to
change the percentage, until your desired
percentage is reached.
Figure 34
Holding down on the (+) PITCH BEND
BUTTON (12) will provide a speed bump in
the playback pitch.
Figure 35
3. PITCH BEND BUTTONS (12):
The (+) PITCH BEND BUTTON (12) will increase track playback speed and the (-) PITCH BEND BUT-
TON (12) will decrease track playback speed. The extent to which the speed changes is proportion-
ate to the amount of time the button is pressed. For example, if the (+) PITCH BEND BUTTON (12) is
held down continuously as in Figure 35, the speed will increases and will continue to increase until
it reaches the percentage the PITCH PERCENTAGE BUTTON (13) is set to. When you release the (+)
PITCH BEND BUTTON (12) the speed will automatically return to it’s previous set speed.
©American Audio® - www.americanaudio.us - Media Operator™ Instruction Manual Page 22