Filter
Top Products
©American Audio® - www.americanaudio.us - Media Operator™ Instruction Manual Page 15
BASIC OPERATIONS (CONT.)
7. FRAME SEARCH
This feature allows you to scroll through a track frame by frame, allowing you to find and set a starting cue
or loop point. To use the scroll function you must first be in Pause Mode (see section 4) or Cue Mode (see
section 8). Once you are in Pause or Cue mode, press the SEARCH BUTTONS (19) to scroll through the track
(Figure 11). When you use the SEARCH BUTTONS (19) the monitor function allows you to here what you are
scrolling through. Once you reach your desired starting point you can set a cue (starting) point by pressing the
PLAY/PAUSE BUTTON (14) as in Figure 9. Pressing the CUE BUTTON (15) as in Figure 10 will now return you
to the point you just set.
Figure 11
8. SETTING a CUE POINT:
Setting A Cue Point:
A cue point is the exact point playback will begin when the PLAY/PAUSE BUTTON (14) is pressed. You may set
your cue point anywhere on a track. There are two ways to set and create a CUE point as detailed in figures
12 and 13.
1) You may press the IN BUTTON (8) on the fly
(while the track is playing). This will set a CUE
Point without music interruption. Pressing the
CUE BUTTON (15) will now return you to the
same point that you pressed the CUE BUT-
TON (15). Pressing the CUE BUTTON (15) will
now return you to this exact point.
Figure 12
2) You may also use the SEARCH BUTTONS
(19) to set a cue point. While a track is in
PAUSE or CUE mode, use the SEARCH
BUTTONS (19) to scroll through a track to
find your desired starting point. Once you
have found your desired position press the
PLAY/PAUSE BUTTON (14) to set your cue
point. Pressing the CUE BUTTON (15) will
now return you to this exact point.
Figure 13