Filter
Top Products
10
2-way studio reference monitors & Architectural Speakers
5-inch cone with high temperature voice coil and damped rubber
surround
Specially developed dome with magnetic shielding
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Positive signal at + input produces outward LF cone displacement
factory programmed either 115V~50/60Hz, 230V~50/60Hz or
100V~50/60Hz
vinyl-laminated high acoustic efficiency MDF
250 mm (H) x 176 mm (W) x 200 mm (D)
5kg/unit (without packing)
56Hz - 22kHz
3kHz
40W
30W
> 100dB typical A-weighted
20k ohms balanced, 10k ohms unbalanced
85mV pink noise input produces 90dBA output SPL at one meter
with volume control at maximum
RF interference, output current limiting, over temperature, turn-
on/off transient, subsonic filter, external main fuse
Blue power on/off indicator on front panel
Type:
LF Driver:
HF Driver:
Input Connectors:
Polarity:
Indicator:
Power Requirements:
Cabinet:
Dimension:
Weight:
Frequency Response:
Crossover Frequency:
LF Amplifier Power:
HF Amplifier Power:
S/N Ratio:
Input Impedance:
Input Sensitivity:
Protection:
Appendix A - Technical Specifications
*Above specifications subject to change without notice