Filter
Top Products
3
EN
Scanning FM radio stations:
Press and hold the
or buttons to scan radio stations in an
incremental manner.
NOTE: When the reception level of the FM station is strong enough
for stereo reception, the FM stereo indicator on the LCD screen will
illuminate.
Programming FM radio stations:
To program FM radio stations into the wireless remote, follow the
steps below:
1. Press the SOURCE button until “FM” is displayed on the
LCD screen.
2. Use the and buttons to tune in the station to be
preset.
3. To program the station in the inMotion Classic memory,
press and hold for 3 seconds one of the preset
buttons [P1, P2, P3, P4] on the wireless remote. The
LCD will display the preset number together with the
word “SAVED” when a station has been successfully
programmed.
Once an FM radio station has been programmed, simply press the
appropriate preset button [P1, P2, P3, P4] to select it.
NOTE: To re-program a station in the inMotion Classic memory,
simply repeat steps 1–3.
Alarm Clock Function
The inMotion Classic is compatible with your iPod’s alarm clock
feature. To use your iPod and the inMotion Classic as an alarm
clock, follow the steps below:
1. Activate the alarm clock feature on your iPod (for more
information, consult your iPod user’s guide.)
2. Dock your iPod in the inMotion Classic.
3. Make sure the inMotion Classic is plugged into a wall
outlet.
4. Turn on the inMotion Classic by pushing the button.
The indicator light turns on.
5. Press the SOURCE button until “iPod” is displayed on
the LCD screen.
6. Use the “+” and “–” buttons on the inMotion Classic to
set the master volume.
NOTE: For the alarm clock function to work properly, the inMotion
Classic must be plugged in to a wall outlet. The inMotion Classic
will otherwise automatically shut down if no audio is detected for
four minutes.
Connecting to alternate audio source
The inMotion Classic system includes an auxiliary input jack that
allows you to connect to alternate audio sources, such as non-
dockable iPods, CD players, MP3 players, portable DVD players,
and laptops. To connect the iM600 to an alternate audio source,
follow the steps below.
1. Locate a 3.5 mm stereo cable (sold separately).
2. Connect one end of the 3.5 mm stereo cable into the
auxiliary input jack (AUX) located on the back of the
inMotion Classic system, and the other end to the
headphone or line out jack on your alternate audio
device.
3. Press the SOURCE button until “AUX” is displayed on
the LCD screen.
4. Set the volume on the audio source at mid-level.
5. Set the volume on the inMotion Classic at minimum level
and adjust to a comfortable listening level.
Volume
The “+” and “–” buttons control the master volume. Press and
hold the “+” button to increase the volume and the “–” button to
decrease the volume.