Filter
Top Products
2
Welcome
Thank you for purchasing the Altec Lansing inMotion Classic
speaker system. Designed specifically to work with your iPod, this
system provides high-quality audio performance that brings out the
best in your music.
Please carefully read this User Guide for instructions on setting up
and using your inMotion Classic speaker system.
Prior to installing or operating the Altec Lansing inMotion Classic
speaker system, refer to the important product safety information.
Getting Assistance
The answers to most setup and performance questions can be
found in the Troubleshooting section of this guide. You can also
consult the frequently asked questions (FAQ) in the customer
support section of our Web site at www.alteclansing.com.
If you live in North America and still can’t find the information you
need, please call our customer service team for assistance before
returning this product to your retailer under their return policy.
Tel: 800-258-3288 (Toll Free in US and Canada)
Email: csupport@alteclansing.com
If you live outside of North America, please visit our Web site
at www.alteclansing.com and select your region to locate your
country’s distributor.
For the most up-to-date information, be sure to check our Web site
at www.alteclansing.com.
Registering Your Product
Visit www.alteclansing.com to register your product online, so
we can provide you with the best possible service and technical
support.
Placing the inMotion Classic
Open the inMotion Classic by pressing the button on the front
of the speaker system. Position the inMotion Classic on a level
surface, preferably close to you (within three feet).
Assembling the inMotion Classic
Dock your iPod by sliding your iPod on top of the iM600 docking
station. If necessary, first install the docking adapter that came with
your iPod. While the docking adapter is not required for proper
functioning of your iPod and iM600, it will provide a better fit.
NOTE: Alternate audio sources — such as non-dockable iPods,
CD players, MP3 players, portable DVD players, and laptops — can
also be connected to the inMotion Classic. For more information,
see the “Connecting to alternate audio source” section.
Power
Use one of the following two options to power your inMotion
Classic:
AC (Wall outlet) Power
Insert the barrel connector from the power supply into the DC
connector on the rear of the inMotion Classic. After this connection
is made, insert the power supply into a wall outlet.
DC (Battery) Power
The inMotion Classic features a built-in rechargeable Lithium-ion
battery.
Charging time up to 3 hours
Continuous Playing Time up to 5 hours
Charging the rechargeable battery:
The battery should be fully charged before initial use.
To recharge the battery, insert the barrel connector from the power
supply into the DC connector on the rear of the inMotion Classic.
After this connection is made, insert the power supply into a
wall outlet. The indicator light turns on. When the battery is fully
recharged, the indicator light turns off.
When the battery icon on the LCD screen displays a single
segment the battery should be recharged. When the icon starts
flashing, the iM600 is about to shut down.
WARNING: During the recharging process it is typical for the
battery to become warm. To be safe, keep flammable materials
away from the inMotion Classic.
NOTE: To conserve battery power, reduce the inMotion Classic
volume level.
Disconnecting the rechargeable battery:
1. Unplug the inMotion Classic from the wall outlet.
2. Open the inMotion Classic by pressing the button on the
front of the speaker system.
3. Remove the rechargeable battery compartment cover by
removing the 2 screws.
4. Unplug the battery and remove it.
Start Playing
1. Turn on your iPod.
2. Turn on the inMotion Classic by pushing the button.
The indicator light turns on.
3. Press the SOURCE button until “iPod” is displayed on
the LCD screen.
NOTE: To avoid hearing a popping sound when you turn on your
inMotion Classic, always turn on your audio source first.
Power Off
Turn off the inMotion Classic by pushing the button. The indicator
light shuts off.
Auto Shut-down
During battery-only operation the inMotion Classic automatically
shuts down if no audio is detected for four minutes. Press the
button to turn the inMotion Classic back on.
NOTE: The Auto Shut-down feature is active during battery-only
operation. If the AC wall adapter is used, the inMotion Classic
will remain on until the
button is pushed and the indicator light
shuts off.
FM Radio
The inMotion Classic features a built-in FM radio.
Activate the FM radio mode:
Press the SOURCE button until “FM” is displayed on the LCD
screen.