Filter
Top Products
If you use a router or firewall, then you may need to check how you can disable them with the router
supplier.
6) FTP ON :
After you set up all configurations, then select [On] at FTP server.
7) Save the configurations & run (use) :
After you set up the all configuration and press [Setup] button on the remote control then you are ready to
use FTP server function.
Go to the PC and run a FTP program at a PC and access to the MG-350HD.
8) Check the address & status of FTP sever :
If you want to check the FTP Server address & the related information, then
press [Info] button three times
on the remote control then you will get the below pop-up.
* When you press [Info] button just one time, then you will get ‘Network & Mac information as below;
89