Filter
Top Products
After writing, press [SETUP] again for saving configurations.
9If you have already been provided dynamic IP address from
DHCP Server or IP Router on your local area network, you
don’t need to write static IP address absolutely. Use ‘DHCP
on’ or write IP address & Subnet mask that DHCP Server or
IP Router provide.
9If you have already been ‘obtained an IP address
automatically’ from DHCP Server or IP Router on your local
area network, you don’t need to write specific IP address
absolutely. Use ‘Obtain an IP address automatically’ or write IP
address & Subnet mask that DHCP Server or IP Router
provide.
6) Set the network configurations of MG-350HD.
9You have to connect MG-350HD to TV set for this setup.
See “6.1 Connect Video Cable”.
Press [SETUP] of remote control for moving
to setup screen.
On that screen, select ‘DHCP Support Off’
and write IP
address & Subnet mask.
For example,
IP Address: 192.168.1.2
Subnet mask: 255.255.255.0
9Check ‘IP address obtained automatically’
When you use ‘DHCP On’, you can see the IP address on
information screen with pressing [INFO] button.
<MG-350HD’s IP Address>
31