Filter
Top Products
1.3.2 Windows ME
1) After connecting MG-350HD and plug power cable.
Windows itself will install driver automatically.
A
nd then,
check the driver installation at Windows [Start > Settings >
Control Panel > (view all Control Panel options) > System >
Device Manager > Universal Serial Bus controllers > USB
Mass Storage Device]
3) After copying data, remove MG-350HD
with using
remove icon at Windows right-down corner. If you
don’t follow this procedure, data and MG-350HD may have
damage.
2) Check ‘My Computer’ or ‘Explorer’, there should be a new
volume. You can copy any data to this volume.
9If a new volume is not be appeared, check HDD format or not,
and HDD file system. Windows ME only detect FAT32 file
system.
20