23
You can use the following power sources:
• LR6 (size AA) alkaline batteries
• AC power adaptor
For the battery life, see “Specifications”
(page 29).
Using the dry batteries
For inserting procedure, see “Playing an
audio CD or ATRAC3plus/ATRAC3/MP3
files” (page 10).
To remove the batteries
Press down the # side of the batteries and
remove them.
When to replace the batteries
You can check the remaining power of the
batteries in the display.
Replace the batteries when “ ” flashes.
t t t t t
“Lo batt”*
* Beep sounds.
When the batteries are depleted, replace both
batteries with new ones.
Notes
•The indicator sections of roughly shows the
remaining battery power. One section does not
always indicate one-fourth of the battery power.
• Depending on operating conditions, the indicator
sections of
may increase or decrease.
B
Connecting to a power source
To attach the battery compartment lid
If the battery compartment lid is detached by
an accidental drop, excessive force, etc.,
attach it as illustrated below.
Using the AC power
adaptor
Connect the AC power adaptor to the DC IN
4.5 V jack and an AC outlet.
to an AC
outlet
to DC IN
4.5 V
Connecting to a power source