Filter
Top Products
6
Quick Installation Guide
Driver Installation and Configuration
The diskette labeled “Driver Diskette,” that comes with the
package contains all the software drivers available for the
Cheetah Gigabit Adapter. A RELEASE.TXT file, describing the
contents of the diskette is found in the root directory. Different
drivers are stored in separate subdirectories, which also
include a text file. Select the driver you need for your system
and refer to the text file for the installation and configuration
procedure. Any new or updated drivers can be downloaded
from Accton’s Web site at http://www.accton.com.
Connecting Fiber Cable
To connect to a 1000BASE-SX Gigabit Ethernet device, use
the SC connector on the network card and 62.5/125 or
50/125 µm multimode fiber optic cable. Note that for 62.5/125
µm cable with ST connectors, Accton provides an optional SC
to ST plug converter (Cheetah ST Converter, ST5002).
The attached device must be within the distance limitations
specified by the IEEE 802.3z 1000BASE-SX specification.
Observe the guidelines in the following table.
shtgneLelbaCrebiFXS-ESAB0001
retemaiDeroC htdiwdnaBladoM htgneLmumixaM
snorcim521/5.26mk/zHM061)tf227(m022
mk/zHM002)tf209(m572
snorcim521/05mk/zHM004)tf1461(m005
mk/zHM005)tf5081(m055