50 Zebra ZXP Series 1 Card Printer User’s Manual P1060728-002
4: Printer Settings and Adjustments
Printer Properties
Firmware Download
This option is used to install the ZXP Series 1 firmware, downloaded from the Zebra web site
at
http://www.zebra.com under Drivers & Downloads.
Step 1. Download the firmware from Zebra web site (
http://www.zebra.com ), and save it to
a location you can easily find.
Step 2. In the Tools window, click on the Select File button.
Step 3. From the Browse window, “find” and select the firmware file (BIN file type) you
downloaded in Step 1; and click on the Open button.
Step 4. Click on the Start Firmware Download button to install the firmware.
Step 5. Wait while the firmware downloads and installs, and then wait while the printer resets
and initializes.
Step 6. When the installation is complete, the Status field will display Firmware
Downloaded Successfully.
Important • Do not turn off the power to the printer until the process is done and the LCD
Display shows READY. If the download process is interrupted, the printer will not operate.
