Zebra Technologies zebra zxp series 1 Manual

A SERVICE OF

next previous

3: Printer Setup

Loading Cards

P1060728-002 Zebra ZXP Series 1 Card Printer User’s Manual 35

3. Slide the card guide all the way to the right until it locks in place with an audible click.

4. Remove the wrapper from the card stack.

5. Examine the cards, and discard any cards with damaged edges.

6. Holding the card stack by its sides, fan the cards (like flexing a deck of playing cards)

at least once from each end, so as to separate all the cards.

7. Restore the card stack to its original squared-off condition.

8. Place the stack of cards into the card feeder.

9. Close the card feeder cover. When card feeder cover is closed, the card guide locking

mechanism will be released automatically.

Caution • Hold the cards by the edges only. DO NOT touch print surfaces as this can

reduce print quality.