Starting your washer
Before starting
your washer:
1 Measure and add detergent
2 Place sorted load in washer
3. Start washer
Select a
1. LOAD SIZE
l
Turn the knob to point at a setting
l
Match the wash water temperature
that describes the size of load you
to the type of fabrics and soils being
want to wash
washed.
l
The water level can be set for SMALL
(a few items) or LARGE (a full load).
l
All rinses are cold.
Recommended wash temperatures
can be found in your “Laundry Guide’:
DO NOT LOAD
ABOVE CLOTHES GUARD
I
NOTE: Use the LARGE water level
for best permanent press results.
I
Select WATER _
LOAD SIZES AND WATER LEVELS
For best cleaning results, the
load must be able to move freely
in the water. Too big a load or too
little water can cause wear or
tearing of load items. ”
DO NOT
OVERLOAD WASHER.
‘Approximate
fill with load.
LARGE (17.3 gals.165.5 L)’
SMALL (9.5 gals.136.0 L)’
