— 16 —
FORM 31018 (2-97) PRINTED IN U.S.A.
TROUBLESHOOTING
POSSIBLE CAUSES
1. Adjustable baffle closed.
2. Overactive flue.
3. Temperature too low.
4. Improper operation.
5. Thermostat calibration (contact your local Vulcan Service
Office).
1. Adjustable baffle open.
2. Temperature too high.
3. Faulty ventilation.
4. Thermostat calibration (contact your local Vulcan Service
Office).
1. Thermostat calibration (contact your local Vulcan Service
Office).
2. Oven not level side-to-side.
3. Improperly installed.
4. Input to burners uneven.
1. Overactive flue.
2. Oven not level front-to-back.
3. Door not closing properly.
1. Temperature too low.
2. Baking time too long.
3. Thermostat calibration (contact your local Vulcan Service
Office).
1. Pilot flame too low.
2. Restriction in pilot orifice.
3. Problem with pilot outage gas shutoff valve.
4. Draft.
1. Insufficient input.
2. Poor air-gas adjustment (contact your local Vulcan Service
Office).
3. Restriction in pilot orifice.
4. Restriction in main burner ignition ports.
PROBLEM
Too Much Bottom Heat
Uneven Baking
Too Much Top Heat
Uneven Baking Side-to-Side
Uneven Baking Front-to-Rear
Dried Out Products
Pilot Outage
Poor Ignition
