Front Panel (D-5.5)
OUTPUT CHANNEL
Level Control for Return to Group (RET TO GROUP,
LEVEL)
This control adjusts the level of signal from the AUX
1 return and AUX 2 return, or the EFF return and
REV return.
Cross-fate Control to Group (RET TO GROUP,
X-FADE)
With the return signal select switch set to the
REV/EFF position, the EFF and REV return signal
levels are equally assigned to the group buss. When
the control is in its center, detent position. Rotating
the control counter-clockwise decreases the signal
level of the EFF return, keeping the original level of
the REV return signal, while rotating the control
clockwise decreases the signal level of the REV
return, keeping the original level of the EFF return
signal.
With the return signal select switch set to the aux
1/aux 2 position, the aux 1 and aux 2 return signal
levels are equally assigned to the group buss when
the control is in its center, detent position. Rotating
the control counter-clockwise decreases the signal
level of the aux 2 return signal, keeping the original
level of the aux 1 return signal, while rotating the
control clockwise decreases the signal level of the
aux 1 return, keeping the original level of the aux 2
return signal.
Return Signal Select Switch (REV/EFF, AUX 1 /
AUX 2)
This switch selects either the REV/EFF return signals
or the AUX 1 / AUX 2 return signals to feed them to
the group buss.
Pan Pot
(PAN)
The pan pot control assigns the fader output signal of
each group channel to the stereo L and R mixing
busses. At the detented center position, the pan pot
routes the signal equally to the L and R mixing
busses. Panning from one side to the other gradually
assigns the input signal to either the stereo L or R
mixing busses exclusively.
Signal/Peak LED Indicator (SIG/PEAK)
The LED indicator lights in green colour when the
group output signal reaches more than -30dB, and
turns to red when the groups signal reaches -3dB
below clipping, giving a visual reference for adjust-
ment of the group fader. (See NOTE 1)
Group Channel ON indicator (CHANNEL ON)
The LED indicator lights orange when the group
channel ON/OFF switch is "on".
Group Channel ON/OFF Switch (CHANNEL)
This pushbutton connects or disconnects the signal
to the group output and stereo L/R busses.
— 7 —
NOTE 1:
Levels
should be
adjusted
so that the LED only
indicates that the channel is being over driven
and the level should be reduced.
flashes red intermittently. A steady red light
