ViewSonic CD5230 32
DDC/CI
• Turns on or off the DDC/CI (Display Data Channel/Command Interface) function of the LCD monitor.
When this function is turned on and the LCD monitor is connected to a PC, the LCD monitor
communicates with the PC and automatically and optimizes image display.
• Press ENTER, and then or button to turn this function on or off.
Reset
• If activated, all OSD settings (except the Language setting) will be restored to the factory settings.
• Press ENTER button to activate the reset.
Diagnostic
• Press ENTER button to display the diagnostic information of the LCD monitor:
• Thermal: Displays current temperature inside the LCD monitor.
• Backlight: Displays current backlight brightness of the LCD monitor.
• Ambient: Displays current ambient brightness around the LCD monitor.
• 5V Detect: Displays current 5V voltage detection result.
• 12V Detect: Displays current 12V voltage detection result.
• Operating Time: Displays the time elapsed since the LCD monitor was last turned on. D=Day,
H=Hour.
• Open Lamp Detection: Indicates the number of broken LCD backlight tubes. The LCD monitor
will not work if there are 3 broken LCD backlight tubes. Contact your nearest customer service
center for further inspection or repair.
Thermal + 38 C
Backlight 1Lux
Ambient 368Lux
5V Detect 4.8V
12V Detect 11.8V
Operating Time 2D 23H
Open Lamp Detection 0
Setting
:Move
:Enter
:Exit
Enter
Exit
