ViewSonic CD5230 25
Picture
Picture Mode
• Allows you to choose from the following preset picture modes: Standard, Vivid, Cinema and User.
• Press ENTER, and then or button to change selection.
Contrast
• Adjusts the image brightness in relation to the input signal.
• Press button to increase contrast, or button to decrease contrast.
Brightness
• Adjusts the image brightness in relation to the background.
• Press button to increase brightness, or button to decrease brightness.
Color
• Adjusts the image color intensity.
• Press button to increase color intensity, or button to decrease color intensity.
Note: This item is not available for the VGA and DVI inputs.
Tint
• Adjusts the image color tint.
• Press button to change the color to a greenish tone, or button to change the color to a purplish
tone.
Note: This item is not available for the VGA and DVI inputs.
Sharpness
• This function is digitally capable to keep crisp image at any timings. It is adjustable to get a distinct
image or a soft one as you prefer and set independently for each picture mode.
• Press button to increase sharpness, or button to decrease sharpness.
Backlight
• Adjusts the backlight intensity of the LCD screen.
• Press button to increase backlight intensity, or button to decrease backlight intensity.
DCR (Dynamic Contrast Ratio)
• When turned on, this function helps enhance image contrast when displaying dark scenes.
• Press ENTER, and then or button to turn this function on or off.
Note: This item is not available for the DVI input.
Color Temp
• Use to choose a color temperature.
• Press ENTER, and then or button to select 10000 K, 9300 K, 6500 K, 5800 K or User.
• If User is selected, you can adjust the Red, Green and Blue settings separately.
Picture Mode Standard
Contrast 88
Brightness 43
Color 55
Tint 50
Sharpness 5
Backlight 5
DCR OFF
Color Temp
9300 K
:Move
:Enter
:Exit
Picture
Enter
Exit
