Controlling the Projector via Scheduling
Date/Time Settings
The Date/Time setting can be adjusted via a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
• A Network Restart is required after the Daylight Savings Time or
SNTP conguration settings have been changed.
• The battery for the built in clock may be dead if the clock loses time even
when the DATE and TIME have been set correctly. Replace the battery by fol-
lowing the instructions on replacing the battery.
• The Internal Clock’s time may not remain accurate. Using SNTP is recom-
mended to maintain accurate time.
NOTE
1) Enter [https://192.168.1.10] into the address bar of the web browser.
Enter the Administrator ID and Password and click [Logon].
2) Click [Date/Time Settings] on the main menu and congure each item. Refer
to the [Date/Time Settings] item in [ConguringandControllingthePro-
jector via a Web Browser] for further information.
3) Click the [Apply] button to save the settings.
84ViewSonic PJ1158
