INPUT Menu
Item Description
RESOLUTION
The resolution for the RGB1 and RGB2 input signals can be set on
this projector.
(1) In the INPUT menu select the RESOLUTION using the ▲/▼ buttons and
press the ► button.
The RESOLUTION menu will be displayed.
(2) In the RESOLUTION menu select the
resolution you wish to display using the ▲/▼
buttons.
Selecting AUTO will set a resolution appropri-
ate to the input signal.
(3) Pressing the ► or ENTER button when
selecting a STANDARD resolution will auto-
matically adjust the horizontal and vertical
positions, clock phase and horizontal size
and automatically select an aspect ratio. The
INFORMATION dialog will be displayed.
(4) To set a custom resolution use the ▲/▼
buttons to select the CUSTOM and the CUS-
TOM RESOLUTION BOX will be displayed.
Set the horizontal (HORZ) and vertical (VERT)
resolutions using the ▲/▼/◄/► buttons.
Although not all resolutions are guaranteed.
(5) To save the setting place the cursor on the
right-most digit and press the ► button.
The horizontal and vertical positions, clock
phase and horizontal size will be automati-
cally adjusted and an aspect ratio will be
automatically selected.
After the INFORMATION dialog has displayed
for about 10 seconds the screen will return
to the RESOLUTION menu displaying the
changed resolution.
(6) To revert back to the previous resolution
without saving changes place the cursor on
the left-most digit and press the ◄ button.
The screen will then return to the RESOLUTION menu displaying the previ-
ous resolution.
• For some pictures, this function may not work well.
INPUT Menu (continued)
4'51.76+10
56#0&
%7561/
#761
Z
Z
Z
Z
RESOLUTION MENU
INFORMATION
RGB1
1280x 768@ 60
INFORMATION
RGB1
992x 744@ 60
4'51.76+10
56#0&
%7561/
#761
Z
Z
Z
Z
%7561/4'51.76+10
5'6
*14<Z8'46
Z
37+6
CUSTOM RESOLUTION
BOX
34ViewSonic PJ1158
