57
¾ FTP Server Name: Type the FTP server name to upload still images up to 64 characters, or the
IP address of the FTP server.
¾ User Name: Type the user name for the FTP server.
¾ Password: Type the password for the FTP server.
¾ Retype Password: To confirm the password, type the same characters as you typed in the
Password box.
¾ Passive Mmode: Set whether you use the passive mode of FTP server or not when connecting
to FTP server. Select On to connect to FTP server using the passive mode.
¾ Attached File Type: You can choose snapshot or video clip for alarm sending. Select
“Snapshot,” one snapshot will be transmitted to the specified FTP server while motion detection
/ audio detection triggered. Select “Video clip,” one 5-seconds video clip will be transmitted.
¾ Test: After setting the FTP server information, you can tick the test key to test if the connection
between IP CAM and FTP server works.
8.1.2 Alarm Sending
Set to forward a snapshot or video clip file to the specified FTP server linked with the alarm detection by
the external sensor input or by the built-in motion detection function. Select On to send the file to FTP
server linked with the alarm detection.
