A SERVICE OF

logo

Open as PDF
next previous
Reelmaster 5010 SeriesPage 6 -- 6Chassis (Rev C)
Steering Column
1. Steering column
2. Hydraulic fitting (4 used)
3. Steering wheel
4. Steering wheel cover
5. Foam column
6. Socket head screw (4 used)
7. Flange nut
8. O--ring
9. Hydraulic tube
10. Hydraulic tube
11. Hydraulic tube
12. Hydraulic tube
13. Column brace
14. Steering control valve
15. Flange head screw (6 used)
16. Cap screw (2 used)
17. Flat washer (2 used)
18. Flange nut
19. Tube clamp
20. Lock nut
21. Flat washer
22. O--ring
23. Gear pump
Figure 2
FRONT
RIGHT
2
1
16
17
19
19
18
9
10
12
11
21
13
3
4
15
7
5
14
8
20
6
7
15
23
20 to 26 ft--lb
(28to35N--m)
ANTISEIZE
LUBRICANT
ANTISEIZE
LUBRICANT
22
Removal (Fig. 2)
1. Park the machine on a level surface, engage the
parking brake, lower the cutting units and stop the en-
gine. Remove the key from the ignition switch.
2. Remove cover from steering wheel by carefully pry-
ing up on one of the cover spokes.
3. Remove lock nut and flat washer that secure steer-
ing wheel to steering column.
4. Use a suitable puller to remove steering wheel from
steering column. Remove foam collar.