3 − Menu screens
16 TASCAM SS-R1
Operations in the menu screens
You can perform operations in the menu screens as fol-
lows.
To select an item (vertically in the screen):
Turn the
MULTI JOG dial of the SS-R1.
Use the
CURSOR § , ¶ keys of the remote.
To confirm the highlighted item:
Press the
MULTI JOG dial of the SS-R1.
Press the
ENTER key of the remote.
To move the cursor left/right:
Use the
∆ , ˚ keys of the SS-R1.
Use the
CURSOR ˙ , ¥ keys of the remote.
To select a sub-screen not currently shown in the
screen (a ¥ is shown at the right):
Press the
˚ key of the SS-R1.
Press the
CURSOR ¥ key of the remote.
To return to the previous menu level:
Press the
∆ key of the SS-R1. Press the CURSOR
˙ key of the remote.
To return directly to the home screen from menu
mode:
Press the
TIME (ESC) key of the SS-R1.
Press the
CLR/ESC key of the remote.
If there is an item above (or below) the currently
displayed list, a § or ¶ symbol will be shown at
the top or bottom of the list.
As a specific example, we’ll explain how to turn the
PLAY menu item AUTO CUE “on”, and then change
the auto cue level.
1 Press the MENU key to access the main menu list
screen.
2 Select the desired menu.
From the SS-R1:
Turn the MULTI JOG dial to highlight PLAY, and then
press the MULTI JOG dial.
From the remote:
Use the CURSOR § , ¶ keys to highlight PLAY, and
press the ENTER key.
•
•
•
•
•
•
•
•
3 Select the AUTO CUE item.
From the SS-R1:
Turn the MULTI JOG dial to highlight AUTO CUE, and
then press the MULTI JOG dial (or the ˚ key).
From the remote:
Use the
CURSOR
§
, ¶
keys to highlight AUTO
CUE, and then press the
ENTER
key (or the
CURSOR
¥ key).
4 Turn the AUTO CUE item ON.
From the SS-R1:
Turn the MULTI JOG dial to highlight ON
.
From the remote:
Use the CURSOR § , ¶ keys to highlight AUTO
CUE.
5 Proceed to the AUTO CUE sub-screen.
From the SS-R1:
Press the ˚ key.
From the remote:
Press the CURSOR ¥ key.
6 Set AUTO CUE LEVEL to the desired level.
From the SS-R1:
Turn the MULTI JOG dial to select a value.
From the remote:
Use the CURSOR § , ¶ keys to select a value.
7 To return to the home screen.
From the SS-R1:
Press the TIME (ESC) key.
From the remote:
Press the CLR/ESC key.
