– 10 –
ENGLISH
4 (Using the auto loading function)
• With the auto cutter installed.
1) The unit is shipped with the head-up
lever in the up position. Press the
lever back to put it in the closed
position. See “Chapter 3: Printer
Connection” for details.
2) Insert the edge of the paper into the
paper feeder. If inserted correctly,
the edge of the paper will pass
through the paper exit.
Caution
If the paper is not completely straight
when it is inserted into the unit, the
paper will “skew”
*
1)
and the edges
will fold. Depending upon the degree
of the skew, the flow of paper can be
automatically corrected by pressing
the FEED switch
*
2)
to adjust the
flow of paper. However, should the
paper become extremely skewed, a
paper jam may occur. To clear the
jam, pull the auto cutter unit all the
way back in the direction indicated
by the arrow until the lock engages.
With the lever in the “head-up” posi-
tion, pull out the paper from the paper
feeder.
*
1)
Skew: When paper is fed unevenly
into the printer.
*
2)
See “Chapter 6: Control Panel” for
details on operating the FEED
switch.
Paper exit
Paper feeder
Auto cutter
unit
Support guide
Head-up lever
Paper guide
Feed knob
Feed switch
Auto cutter unit
