27
INSERTING AND REMOVING THE CF CARD
The SD10 camera uses CompactFlash™ (CF) cards to store images. The
camera supports both Type I and Type II CF cards, including Microdrives.
TO INSERT THE CF CARD
1
Set the “D”-Dial to the OFF position.
2
Slide the cover release lever downward until the
CF card cover pops open.
3
Position the CF card label facing toward you and
insert the CF card smoothly in the direction of
the arrow as far as it can go into the slot.
• The eject button will pop out slightly.
4
Close the CF card cover until it clicks shut.
TIP
• It may be necessary to format the CF card before use. (See P.29)
Approximate number of images (256MB Card)
256MB
HI 2268 x 1512 pixels 32
MED 1512 x 1008 pixels 54
LOW 1134 x 756 pixels 102
◆ These figures are based on estimated file size created under standard shooting
conditions. Actual totals may vary depending on the subject, shooting conditions,
shooting mode, CF Card brand and model.
