A SERVICE OF

logo

46
Rev B
SATO SERVICE MANUAL
CX Series Printers
3-10 Head Open Switch Removal/Replacement
REFER TO THE ACCOMPANYING ILLUSTRATIONS
Switch removal:
1. Remove the printer chassis according to the instructions in Section 3-4.
2. Insert a flat-bladed screwdriver under the switch body and gently pry it
up to detach from the chassis protrusions.
3. Unplug the two connectors.
Switch installation:
Reverse the above steps to install the switch.
GENTLY PRY THE SWITCH
BODY WITH A FLAT-BLADED
SCREWDRIVER
UNPLUG
CONNECTORS
SCREWDRIVER
BLADE