38
Computer Input
This projector has a useful function to resize a projected screen.
When Digital zoom is selected, the On-Screen Menu disappears and
the message “D.Zoom” is displayed. Press the SELECT button to
expand the image. And press the POINT UP/DOWN/LEFT/RIGHT
button(s) to pan the image. The panning function can work only when
the original image is larger than screen size (1280 x 720).
Full
Digital zoom
NOTE
● You can also resize a projected screen with the SCREEN (SCR) button on
the remote control. (p12)
● This Screen Menu cannot be operated when “720p (HDTV)”, “1035i
(HDTV)”, or “1080i (HDTV)” is selected in the PC System Menu (p32).
● The True and Digital zoom cannot be selected when “480i”, “575i”,
“480p”, or “575p” is selected in the PC System Menu (p32).
● This projector cannot display any resolution higher than 1280 X 720. If your
computer’s screen resolution is higher than 1280 X 720, reset the resolution
to the lower before connecting to the projector.
● The image data in other than the resolution (1280 x 720) is modified to fit
the screen size in initial mode.
● The panning function may not operate properly if the computer system
prepared in the PC Adjust Menu is used.
Provides image to fit screen size.
Normal
True
Screen Menu
Provides image in its original size. When the original image size is
larger than the screen size (1280 x 720), this projector enters “Digital
zoom” mode automatically.
Provides an image to fit the horizontal size of the screen.
Screen Size Adjustment
Select the Screen Menu with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Select an item with the Point Up/Down button and press the
Point Left/Right button to set the screen size.
1
2
