24
Video Input
Select the Input Menu with the Point Up/Down button, and then
press the Point Right button to enter the sub-menu.
Select Input 1 with the Point Up/Down button and then press
the Point Right button. The Source Select Menu will appear.
1
2
Move the pointer to the source that you want to select and then
press the SELECT button.
3
When selecting the AUTO button, the projector automati-
cally detects incoming video signal, and adjusts itself to
optimize its performance. However, the projector
selects connection in the following order under the condi-
tion of connecting more than one input source:
1st Y-Pb/Cb-Pr/Cr
2nd S-VIDEO
3rd VIDEO
Y-Pb/Cb-Pr/Cr has priority over S-VIDEO. S-VIDEO has
priority over VIDEO.
Auto
When video input signal is connected to the VIDEO jack,
select Video.
Video
When video input signal is connected to the S-VIDEO
jack, select S-Video.
S-Video
Menu Operation
Input Menu
Source Selection Menu
pointer
Closes the source selection menu.
When video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select Y,Pb/Cb,Pr/Cr.
Y,Pb/Cb,Pr/Cr
(component)
