3-49
Operation with a Full Function Handset
Entering a Group MMSI Number
To enter a Group MMSI number, select ENTRY then press the ENT key.
Use the numeric keys (0 through 9) to input desired group number. The
currently selected location is indicated by a flashing “–” character. Pressing
a numeric key enters that value then advances to the next place. To go
back by 1 digit, press the CLR key.
After the last position has been filled, the message CONT? Y appears.
Press ENT to register the group and exit the Menu operation. To exit
without registering, press SQ UP/DOWN until DEL? N is displayed. Press
the ENT key and operation returns to mode before the Menu operation
began.
Note: By default, the first digit of the Group MMSI is always “0”.
ENT
ENT
numeric
keypad
Deleting a Group MMSI Number
Use the SQ UP/DOWN key to select DELETE. To delete the contents
indicated, press the ENT key and the message DEL? Y is displayed. Press
the ENT key to process the deletion and exit the Menu operation. To exit
without deleting, press the SQ UP/DOWN key until DEL? N is displayed.
Press the ENT key and operation returns to the mode before the Menu
operation began.
ENT ENT
