En
11
03
Connecting your equipment
Connecting your equipment
Connecting your equipment
This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This
chapter explains the kinds of components you can connect to make up your home theater system.
CAUTION
Before making or changing the connections, switch off the power and disconnect the power cord
from the power outlet. Plugging in should be the final step.
Rear panel
HDMI
VIDEO
CONTROL
IR
COMPONENT
VIDEO
VIDEO 1 IN
TV/SAT
IN
ZONE 2
DVR/BDR
CD-R/TAPE
ZONE 2
DVR/
BDR
OUT
OUT
DVD ININ
IN
IN
IN
CD
L
R
L
R
IN
L
R
OUT OUT
VIDEO 1
IN
DVD INBD IN
DVR/BDR IN
DC OUTPUT
for WIRELESS LAN
FM UNBAL
75
FRONT CENTER
SURROUND
SURROUND BACK / ZONE 2
IN
R L R L R LR
L
(
Single
)
AM LOOP
(
CD
)(
DVD
)
TV/SAT
VIDEO 1
DVDY P
B
P
R
(
OUTPUT 5
V
0.1 A MAX
)
(
DVR/BDR
)(
TV/SAT
)
COAXIAL
(
10/100
)
LAN
AUDIO
ADAPTER PORT
SIRIUS
PRE OUT
SPEAKERS
ANTENNA
OPTICAL
ASSIGN
ABLE
ASSIGNABLE
ASSIGNABLE
OUT
MONITOR
OUT
MONITOR
OUT
SUBWOOFER
IN
1
(
DVD
)
IN
1
(
DVR/
BDR
)
IN
2
ASSIGNABLE
1
IN
1
IN
2
IN
1
IN
2
(
OUTPUT 5 V 0.6 A MAX
)
Class 2 Wiring
SEE INSTRUCTION MANUAL
SELECTABLE
SELECTABLE
VOIR LE MODE D’EMPLOI
CAUTION:
SPEAKER IMPEDANCE
6
-
16 .
ATTENTION:
ENCEINTE D’IMPEDANCE DE
6
-
16 .
FRONT HEIGHT / WIDE /
B
A
OUT
IN
OUT
IN
Note
The input functions below are assigned by default to the receiver’s different input terminals. Refer
to The Input Setup menu on page 25 to change the assignments if other connections are used.
Input function
Input Terminals
Digital HDMI Component
DVD COAX-1
(DVD)
IN 1
BD
(BD)
TV/SAT OPT-1
DVR/BDR OPT-2
(DVR/BDR)
IN 2
VIDEO 1
(VIDEO 1)
HDMI 1 IN 1
CD COAX-2
Determining the speakers’
application
This unit permits you to build various surround
systems, in accordance with the number of
speakers you have.
! Be sure to connect speakers to the front left
and right channels (L and R).
! It is also possible to only connect one of the
surround back speakers (SB) or neither.
Choose one from Plans [A] to [E] below.
Important
! The Speaker System setting must be made if
you use any of the connections shown below
other than [A] (see Speaker system setting on
page 64 ).
! Sound does not come through simultaneously
from the front height, front wide, speaker B
and surround back speakers. Output speakers
are different depending on the input signal or
listening mode.
[A] 7.1 channel surround system (Front
height)
*Default setting
! Speaker System setting: Normal(SB/FH)
SL
L
FHL
SW
C
R
FHR
SR
SBL
SBR
A 7.1 ch surround system connects the left and
right front speakers (L/R), the center speaker
(C), the left and right front height speakers
(FHL/FHR), the left and right surround speakers
(SL/SR), the left and right surround back speak-
ers (SBL/SBR), and the subwoofer (SW).
It is not possible to produce sound simultane-
ously from the front height or front wide speak-
ers and the surround back speakers.
This surround system produces a more true-to-
life sound from above.
[B] 7.1 channel surround system (Front
wide)
! Speaker System setting: Normal(SB/FW)
FWR
FWL
SL
L
SW
C
R
SR
SBL
SBR
This plan replaces the left and right front height
speakers shown in [A] with the left and right
front wide speakers (FWL/FWR).
It is not possible to produce sound simultane-
ously from the front height or front wide speak-
ers and the surround back speakers.
This surround system produces a true-to-life
sound over a wider area.
[C] 7.1 channel surround system & Speaker
B connection
! Speaker System setting: Speaker B
