Bluetooth adapter
You can use this unit to control a Bluetooth
adapter, which is sold separately.
For details concerning operation, refer to the
Bluetooth adapter’s manuals. This section
provides information on Bluetooth telephone/
audio operations with this unit which differs
from that described in the Bluetooth adapter’s
manual.
! In some countries, CD-BTB200 is not sold
on the market.
! This unit is a head unit group 1 unit.
— But the selecting a function operation is
the same as that of the head unit group
2.
— When a phone call ends, the system re-
turns to the previous source.
— When a call comes in during sources
other than Bluetooth telephone/audio
source and the call is being carried on,
you cannot use BAND/ESC to switch
Bluetooth telephone and Bluetooth
audio.
Digital Signal Processor
You can use this unit to control multi-channel
processor (DEQ-P6600), which is sold sepa-
rately.
By carrying out the following settings/adjust-
ments in the order shown, you can create a fi-
nely-tuned sound field effortlessly.
1 Setting the speaker setting
2 Usingthe positionselector
3 Auto TA and EQ (auto-time alignment and auto-
equalizing)
4 Adjusting the time alignment
5 Adjusting the speaker output levels using a
test tone
6 Selectinga cross-over frequency
7 Adjusting the speaker output levels
8 Adjusting 3-bandparametric equalizer
Introduction of DSP adjustments
1 Press MULTI-CONTROL to display the
main menu.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option. Press to se-
lect.
3 Turn MULTI-CONTROL to select the
audio function.
FADER (balance adjustment) —POSI (position
selector)—PLII (Dolby Pro Logic II)—PANO
(music mode adjust)—OFF (sound field con-
trol)—Lo/Ro (down mix)—DRC (dynamic
range control)—DIRECT (direct)—SLA (source
level adjustment)—AUTO EQ (auto-equalizer
on/off)—FRONT (speaker setting)—HPF
(cross-over frequency)—FRONT-L (speaker
output level)—TEST TONE (test tone)—
INITIAL (time alignment mode)—FL (time
alignment adjustment)—POWERFUL (equali-
zer recall)—PEQ (3-band parametric equalizer)
# You can also use A.MENU on the remote con-
trol to select an audio menu.
Available accessories
En
52
Section
03
