Black plate (38,1)
Introduction of advanced
iPod adapter operation
1 Functiondisplay
Shows the function status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select
FUNCTION.
Turn to change the menu option; press to se-
lect.
The function name appears on the display.
3 Turn MULTI-CONTROL to select the
function.
Turn MULTI-CONTROL clockwise or counter-
clockwise to switch between the functions in
the following order:
Play mode (repeat play)—Shuffle mode (ran-
dom play)—Pause (pause)
# To return to the playbackdisplay, press BAND.
Note
If you do not operatethe function within about 30
seconds, the displayis automatically returned to
the playback display.
Repeating play
For playback of the songs on the iPod, there
are two repeat play ranges: Repeat one (re-
peat one song) and Repeat all (repeat all
songs in the list).
! While Play mode is set to Repeat one, you
cannot select the other songs.
1 Use MULTI-CONTROL to select
Play mode in the function menu.
Play mode appears in the display.
2 Press MULTI-CONTROL to select the re-
peat range.
Press MULTI-CONTROL repeatedly until the
desired repeat range appears in the display.
! Repeat one – Repeat justthe current song
! Repeat all –Repeat all songs in these-
lected list
Playing songs in a random
order (shuffle)
For playback of the songs on the iPod, there
are two random play methods: Shuffle Songs
(play back songs in a random order) and
Shuffle Albums (play back albums in a ran-
dom order).
1 Use MULTI-CONTROL to select
Shuffle mode in the function menu.
Shuffle mode appears in the display.
2 Press MULTI-CONTROL to select your fa-
vorite setting.
Press MULTI-CONTROL repeatedly until the
desired setting appears in the display.
! Shuffle Songs –Play back songs in aran-
dom order within the selectedlist
! Shuffle Albums –Select an album ran-
domly, and thenplay back all the songsin it
in order
! Shuffle OFF –Cancel the random play
<CRD4089-A/N>38
Playing songs on iPod
En
38
Section
08
