Watching the television
You can use this unit to control a TV tuner,
which is sold separately.
For details concerning operation, refer to the
TV tuner’s operation manual. This section pro-
vides information on TV operations with this
unit which differs from that described in the
TV tuner’s operation manual.
1 Bandindicator
Shows which band the TV tuner is tuned to.
2 Presetnumber indicator
Shows which preset has been selected.
3 Channelindicator
Shows which channel the TV tuner is tuned.
1 Press SOURCE to select the TV.
Press SOURCE until you see Television dis-
played.
2 Press BAND to select a band.
Press BAND until the desired band is dis-
played, TV-1 or TV-2.
3 To perform manual tuning, push
MULTI-CONTROL left or right.
The channels move up or down step by step.
4 To perform seek tuning, push and hold
MULTI-CONTROL left or right for about one
second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You cancancel seek tuning bypushing
MULTI-CONTROL left or right.
# If you push andhold MULTI-CONTROL left or
right, you canskip broadcasting channels. Seek
tuning starts assoon as you release
MULTI-CONTROL.
TV tuner
En
40
Section
09
