17
Chapter 1 Basic Operation
Chapter 1
Basic Operation
Flow from Startup to Termina-
tion
• If the program is not installed, see page 93
and install the program.
At first, please confirm the positions of the follow-
ing features using the navigation’s “Hardware
Manual”, “Operation Manual” and display’s
“Operation Manual”.
• Disc loading slot
• NAVI/AV button
• MENU button
1 Start the engine.
After a little time, the navigation opening
screen comes on for a few seconds. Then, a
message screen is displayed.
❒ If the disc is not set, a message asking to
insert the disc appears. After you set the
disc correctly, your Navigation System
starts up.
2 Insert the Pioneer DVD map disc to the
disc loading slot.
3 Press the NAVI/AV button to switch to
the navigation map screen.
Pressing the NAVI/AV button switches
between the navigation map screen and the
audio screen.
❒ If you use “AVD-W6010” or “AVD-W6000”,
press the V.SEL button on the display to
switch to a navigation screen.
4 Check the details of the cautionary mes-
sage and click the OK button.
If the route is already set, it changes to route
guidance mode. The map of your surround-
ings is displayed.
➲ How to read the current position screen ➞
Page 25
➲ Setting the time ➞ Page 94
➲ Starting the operation with voice com-
mands only ➞ Page 52
❒ You can press the TALK (or VOICE) but-
ton of the remote control to proceed
instead of clicking the OK button.
❒ The items which are not effective are indi-
cated in gray.
5 Press the MENU button.
Displays the main menu.
NAVI/AV
N/A
