Problem Solving 73
4 Insert the new image drum unit into your
machine.
Fig11_24.eps
Warning: Never expose the image drum unit to
light for more than 5 minutes. Never
expose the image drum unit to direct
sunlight. Always hold the image
drum unit by the ends. Never touch
the surface of the green drum inside
the image drum unit.
5 Ensure that the tabs on both sides of the image
drum are inserted correctly as shown below.
Then press down firmly on both ends of the
image drum until it snaps into place.
Fig11_25.eps
6 Install a new toner cartridge. Follow Steps 3-7
in “Replacing the Toner Cartridge” in this
section.
7 Wait until the time, date and answering mode
appear on the display. Then press the SELECT
FUNCTION key.
8 Press the 7/COUNTER DISPLAY One-Touch
key. The display will show DRUM COUNT.
9 Press
YES
to clear the image drum unit
counter.
10 Press the SELECT FUNCTION key to finish.
Warning: Please abide by the disposal laws of
your country when discarding used
Image Drum Units.
