Basic Operations 39
Sending a Fax to Multiple Locations
(Broadcasting)
Your machine’s broadcasting feature allows you to
send a document to many different locations at the
same time. For each broadcast operation, you can
select as many One Touch keys, groups, and Auto
Dial Codes as you like. You can also manually
enter up to ten telephone numbers on the numeric
keypad.
Performing a Broadcast Operation
1 Load your documents.
2 Select a location. Refer to the instructions
below.
To Select Using Do This
A One Touch key Press the One Touch
key.
An Auto Dial number Press the AUTO DIAL
key, then enter the two
digit Auto Dial number
on the numeric keypad.
A group Using the numeric
keypad, press the # key,
then enter the number of
the group.
A number dialed on the Dial the number as you
numeric keypad would on a normal
telephone, then press
START.
3 Select another location within 3 seconds after
step 2.
4 Repeat steps 2 and 3 as often as necessary to
continue selecting locations.
5 When you are finished selecting locations,
press START. ENTRY IS OK? displays.
6 Press START. Your begins scanning the
document and dialing the numbers.
To make corrections
1 At step 5, when ENTRY IS OK? displays, press
NO
. PRINT ENTRY REPORT? displays.
2 Press
. PRINTING displays and the
report prints. Or, Press
NO
to skip printing
the report. CHECK LOCATIONS YES (START)
displays.
3 Press the START key. Each entry displays.
Press the START key to accept each entry or
press
to delete a location.
4 When all the entries have been displayed and
CHECK LOCATIONS displays again, press
NO
. ENTRY IS OK? displays.
5 Press the START key. Your machine scans the
documents into memory and begins transmit-
ting the message.
