A SERVICE OF

logo

To use the engine block heater:
1. Turn the engine off.
2. Openthe hoodandunwrap theengineblock
heater cord.
3. Plug the engine block heater cord into a
grounded 3 wire, 3 pronged extension cord.
4. Plug the extension cord into a Ground Fault
Interrupt (GFI) protected, grounded 110-
volt AC (VAC) outlet.
5. The engine block heater must be plugged in
forat least2-4hours,dependingon outside
temperatures, to properly warm the engine
coolant. Use an appropriate timer to turnthe
engine block heater on.
6. Beforestarting theengine, unplugand prop-
erly store the cord to keep it away from
moving parts.
Starting and driving 5-27