OUTSIDE MIRRORS
The outside mirror remote control will operate
only whenthe ignitionswitch isin theACC orON
position.
Movethe smallswitch
᭺
1
toselect theright orleft
mirror. Adjust each mirror to the desired position
using the large switch
᭺
2
.
WARNING
● Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirrorcould cause
an accident. Use the inside mirror or
glance over your shoulder to properly
judge distances to other objects.
● Do not adjust the mirrors while driving.
You could lose control of your vehicle
and cause an accident.
Automatic anti-glare outside mirror
(Driver’s side only) (if so equipped)
The driver’s outside mirror will automatically dim
during nighttime conditions to reduce the glare
from the headlights of trailing vehicles. The auto-
matic anti-glare feature operates only when the
ignition switch is placed in the ON position.
The automatic anti-glare feature will be on when
starting the vehicle. The indicator light on the
automaticanti-glare rearviewmirror willilluminate
when the automatic anti-glare feature is on.
To turnoff theautomatic anti-glarefeature, press:
● the O button on rearview mirror without
compass (Type B).
● the
button on rearview mirror with
compass (Type C).
The indicator light will turn off.
To turn on the automatic anti-glare feature again,
press:
● the | button on rearview mirror without
compass (Type B).
● the
button on rearview mirror
equipped with compass (Type C).
The indicator light will turn on.
For information on the automatic anti-glare rear-
view mirror, see “Automatic anti-glare rearview
mirror” in this section.
Reverse tilt-down feature (if so
equipped)
The reverse tilt-down feature will turn both out-
side mirror surfaces downward to provide better
rear visibility close to the vehicle when the small
switch is in either the L or R position.
LPD0237
3-28 Pre-driving checks and adjustments
