E118
Reference Section
4 Aim the transmitter
at the infrared
receiver on the front
of the camera (A1)
and press the
transmission button.
• Press the transmission
button from a distance of
5 m (16 ft) or less.
• In the remote instant shooting mode, once the subject is in focus, the
shutter is released.
• When the time for self-timer is set to Z 10s (10 seconds) or Z 2s (2 seconds),
the self-timer lamp flashes when the subject is in focus, and then about 1
second before the shutter is released, the lamp stops flashing and remains lit.
To stop the self-timer before an image is captured, press the transmission
button again.
• In the self-timer remote control mode, the remote control mode is set to Z
(remote instant shooting) when the shutter is released.
Replacing the Battery for Remote Control ML-L3 (3V
CR2025 Lithium Battery)
• When changing the remote control battery, make sure that the battery’s
positive (+) and negative (–) terminals are oriented correctly.
• Make sure to read and follow the warnings of “For Your Safety” (Avi).
B Notes About the Remote Control
• The remote control may not function even from a distance of 5 m (16 ft) or less
when shooting in backlit conditions.
• The setting may not be changed when using certain settings of other functions.
