A SERVICE OF

logo

Open as PDF
next previous
Return the filters
Internal filter:
Insert the filter into the hood so that it
hooks into position at the back, then
push it upwards at the front and
make sure it engages in position on
the left and right hand sides.
Twist the grease filter catch as
shown.
Unfold the grease filter and lock the
catch.
External filter:
Open the filter out.
Make sure that the red plastic
guides are at the front and facing up-
wards.
Fit it over the locating pins at the rear
and push it in until a resistance is felt.
Once the grease filters have been re-
turned, press the grease filter button
for approximately 4 seconds to re-
set the filter timer.
Cleaning and care
18