Kramer Electronics VP-81SIDN Manual

A SERVICE OF

next previous

VP-81SIDN - Protocol 3000

41

13 Protocol 3000

The VP-81SIDN can be operated using serial commands from a PC, remote

controller or touch screen using the Kramer Protocol 3000.

This section describes:

 Kramer Protocol 3000 syntax (see Section 13.1)

 Kramer Protocol 3000 commands (see Section 13.2)

13.1 Kramer Protocol 3000 Syntax

13.1.1 Host Message Format

Start

Address (optional)

Body

Delimiter

#

Destination_id@

Message

CR

13.1.1.1 Simple Command

Command string with only one command without addressing:

Start

Body

Delimiter

#

Command SP Parameter_1,Parameter_2,…

CR

13.1.1.2 Command String

Formal syntax with commands concatenation and addressing:

Start

Address

Body

Delimiter

#

Destination_id@

Command_1 Parameter1_1,Parameter1_2,…|

Command_2 Parameter2_1,Parameter2_2,…|

Command_3

Parameter3_1,Parameter3_2,…|…

CR

13.1.2 Device Message Format

Start

Address (optional)

Body

delimiter

~

Sender_id@

Message

CR LF

13.1.2.1 Device Long Response

Echoing command:

Start

Address (optional)

Body

Delimiter

~

Sender_id@

Command SP [Param1 ,Param2 …] result

CR LF

CR = Carriage return (ASCII 13 = 0x0D)

LF = Line feed (ASCII 10 = 0x0A)

SP = Space (ASCII 32 = 0x20)