TK-7150
69
SPECIFICATIONS
GENERAL
Frequency Range ............................................ 136~174MHz (K)
Number of Channels (Zone) ............................ Conventional CH : Max.128 (1 zone x 128ch~128 zones x 1ch)
Trunking ID : Max. 250/zone (max. 32 zones)
Channel Spacing.............................................. Wide : 25kHz, 30kHz Narrow : 12.5kHz, 15kHz
Operating Voltage ........................................... 13.6V DC±15%
Current Drain................................................... Standby : 0.5A Receive : 2.3A Transmit : Less than 12A
Duty Cycle ....................................................... Transmit : 20%
Operating Temperature range ......................... –22ºF~+140ºF (–30ºC~+60ºC)
Frequency Stability (–22ºF~+140ºF) ................ ±0.00025%
Antenna Impedance ........................................ 50Ω
Dimensions (W x H x D).................................. 7-1/12” x 2” x 7” (180mm x 50mm x 170mm)
Weight (net) .................................................... 5.9 lbs (2.7kg)
Band Spread.................................................... 38MHz
RECEIVER
Sensitivity ........................................................ 12dB SINAD : 0.35µV 20dB Quieting : 0.45µV
Selectivity ........................................................ Wide : 84dB (±30kHz) Narrow : 76dB (±15kHz), 76dB (±12.5kHz)
Intermodulation ............................................... Wide : 77dB (±30, 60kHz) Narrow : 75dB (±15, 30kHz)
Spurious Response ......................................... 85dB
External Audio Output ..................................... 12W (@4Ω 3% distortion), 13W (@4Ω 5% distortion)
Internal Audio Output ...................................... 3.2W (@16Ω 3% distortion), 3.5W (@16Ω 5% distortion)
TRANSMITTER
RF Output Power ............................................ 50 to 15 watts High : 50 watts Low : 15 watts
Type of Emission............................................. Wide : 16K0F3E, 20K0F1D Narrow : 11K0F3E, 11K2F1D
Spurious Response ......................................... 75dB
FM Hum & Noise ............................................ Wide : 48dB Narrow : 42dB
Microphone Impedance .................................. 600Ω
Audio Distortion .............................................. Less than 1% at 1000Hz
Kenwood follows a policy of continuous advancement in development.
For this reason specifications may be changed without notice.
FleetSync™ is a trademark of Kenwood Corporation.
Applicable MIL-STD
Standard MIL 810C MIL 810D MIL 810E MIL 810F
Methods/Procedures Methods/Procedures Methods/Procedures Methods/Procedures
Low Pressure 500.1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II
High Temperature 501.1/Procedure I, II 501.2/Procedure I, II Cat. A1 501.3/Procedure I, II Cat. A1 501.4/Procedure I, II
Low Temperature 502.1/Procedure I 502.2/Procedure I, II Cat. C1 502.3/Procedure I, II Cat. C1 502.4/Procedure I, II
Temperature Shock 503.1/Procedure I 503.2/Procedure I Cat. A1,C1 503.3/Procedure I Cat. A1,C1 503.4/Procedure I, II
Solar Radiation 505.1/Procedure I 505.2/Procedure I 505.3/Procedure I 505.4/Procedure I
Rain 506.1/Procedure II 506.2/Procedure II 506.3/Procedure II 506.4/Procedure III
Humidity 507.1/Procedure II 507.2/Procedure II 507.3/Procedure II 507.4
Salt Fog 509.1/Procedure I 509.2/Procedure I 509.3/Procedure I 509.4
Dust 510.1/Procedure I 510.2/Procedure I 510.3/Procedure I 510.4/Procedure I, III
Vibration 514.2/Procedure VIII, X 514.3/Procedure I Cat. 8 514.4/Procedure I Cat. 8 514.5/Procedure I Cat. 20
Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V
