The individual items are selected using the
buttons. If you require to access submenus, they can be called up
using the
button. Changes to the current settings can be made using the
buttons or the numeric keypad.
Tuner 1
Select “Tuner 1” eld and press the
button to allow
you to make the settings for the rst tuner.
Tuner Conguration
The following display appears:
Number of Satellites
Make the settings for the satellites (up to 64 satellites)
here. Select the satellite position (1-64) (in the example
on the right, the “ASTRA 19.2° East” satellite has been
selected in the rst position).
Satellite 1
Select “Satellite 1:***” eld and press the
button
to allow you to make the settings/selection for the rst
satellite.
The following display appears:
Satellite and position:
Select the “Satellite and Position” eld. Select here
the satellite you desire from the available satellites. By
pressing the
button at this point you can view a list of
the satellites saved in the receiver. Use the
buttons
to select the satellite you want and conrm your selection
with the
button.
Uncommitted Switch:
Select the “Uncommitted Switch” eld. Set the “Uncommitted Switches” here to match the conguration of your
reception system. You can select “Deactivated” or a value from “1” to “16” in single unit increments.
