6 Intermec EasyCoder PD4—User’s Guide
Chapter 2—Installation
Unpacking the Printer
Before you install the printer, examine the package for possible damage
or missing parts:
• Open the box and lift the printer out.
• Check that the printer has not been visibly damaged during transpor
-
tation. Keep the packing materials in case you need to move or reship
the printer.
• Check the label on the printer’s rear plate, which gives the voltage, the
part number, and the serial number.
• Check that any options you ordered are included.
• Check that all the accessories are included. As standard, the box con
-
tains:
- Intermec EasyCoder PD4 printer
- Power cord
- Parallel cable
- High edge guide
- Empty ribbon core
- Supporting software and product information on CD
- Quick Start Guide.
• Check that the power cord is appropriate for the local standard. e
printer works with 100 to 240 VAC, 50 to 60 Hz.
If the printer has been damaged in any way during transportation, com
-
plain to the carrier immediately.
If the delivery is incorrect or any parts are missing, report it immediately
to the distributor.
