It also includes software for network administrators using the following
network operating systems:
• Novell NetWare 3.x or 4.x
• Microsoft Windows NT 3.51 and 4.0
• IBM LAN Server 3.0 or greater
• Apple AppleTalk
For more information about software and drivers, see Chapter 3,
“Mopier Software.”
Input/Output
Automatic I/O switching between all installed network I/O ports allows
you to connect multiple computers or even multiple networks to the
mopier simultaneously. If serial connection is required, contact an
authorized HP dealer for information about an optional serial MIO card
or a serial-to-parallel converter. The standard built-in Bi-Tronics
parallel interface allows high-speed two-way communication between
the mopier and your computer.
Networking Capabilities
The mopier includes HP JetDirect Print Server hardware for Ethernet
and LocalTalk and network configuration software to connect your
mopier directly to your local area network (LAN). HP JetDirect
automatically switches among networked protocols, so a single mopier
can serve many networks at once or be moved to a new network without
purchasing additional hardware. One additional MIO port on the
mopier can be used for optional HP JetDirect Print Server hardware for
Token Ring networks.
The HP LaserJet 5Si mopier supports the following network operating
systems:
• Novell NetWare 286 v. 2.15c and beyond; 386 v. 3.11, 3.12, 4.0,
4.01, and 4.1
• Microsoft LAN Manager for OS/2, v. 2.1
• IBM LAN Server for OS/2, v. 3.0
• Microsoft Windows and Windows for Workgroups, v. 3.1, 3.11
• Apple EtherTalk
• Apple LocalTalk
• Microsoft Windows NT, v. 1.0, 3.51, and 4.0
• Microsoft Windows 95
• HP-UX v. 8.0, 9.0, 10
• SunOS v. 4.1.1, 4.1.2, 4.1.3
1
AboutYour
Mopier
EN About Your Mopier 1-7
